Arduino Nano v3, USB‑C (Clone, Soldered)

$31.5 $58.59
DescriptionThis is a Nano V3.0 ATmega328P 5V 16MHz Type‑C.This Arduino-com­pat­i­ble Nano V3.0 micro-con­troller is a small, com­plete, micro-con­troller board based on the ATmega328 MCU. It has more or less the same func­tion­al­i­ty as the Arduino Duemi­lanove, but in a small­er pack­age. It lacks only a DC pow­er jack, and uses the more com­pact Mini USB (Mini‑B) con­nec­tor instead of a stan­dard USB con­nec­tor.Nano V3.0 ATmega328P 5V 16MHz Type‑C is com­pat­i­ble with Arduino pro­grams and the Arduino IDE. This ver­sion of the Nano uses the CH340G USB inter­face con­troller.It can be pow­ered via the Mini‑B USB con­nec­tion, a 6–20V unreg­u­lat­ed exter­nal pow­er sup­ply (pin 30), or 5V reg­u­lat­ed exter­nal pow­er sup­ply (pin 27). The pow­er source is auto­mat­i­cal­ly select­ed to the high­est volt­age source.The type‑C usb is more con­ve­nient to use and small in size.It has exact­ly the same pins as the com­mon Nano board.The micro­proces­sor is ATmega328 (Nano3.0).With Type‑C USB inter­face, it also has 14 dig­i­tal input/output ports (6 of which can be used as PWM out­put), 8 ana­log inputs, a 16MHz crys­tal oscil­la­tor, an ICSP head­er and a reset but­ton.Pow­er sup­ply: Type‑c USB inter­face pow­er sup­ply and exter­nal vin con­nec­tion 7~12V exter­nal DC pow­er sup­ply.Pin-outSpecificationsProces­sor: ATmega328Work­ing volt­age: 5VInput volt­age (rec­om­mend­ed): 7–12VInput volt­age (range): 6–20VDig­i­tal IO pins: 14 (6 of which are used as PWM out­puts) (D0~D13)Ana­log input pins: 6 (A0~A5)IO pin DC cur­rent: 40mAFlash Mem­o­ry: 32KBSRAM: 2KBEEPROM: 1KB (ATmega328)Work­ing clock: 16 MHZPCB Size: 43mm x 18mmPackage List1 X NANO Board (with­out cable) — Sol­dered
Boards

Boards